Arduino Uno and CD4094 [Solved]

i´m having trouble arduino uno , 16-bit shift register made out of 2 cd4094´s.
the program appears working, leds connected on outputs of shift registers nothing. doing wrong ?

code: [select]



#include <avr/pgmspace.h> 
#include <spi.h>

const int latchpin = 10;  //pin connected str(pin 1) of hef4094
//clock = 13, mosi = 11
const int eprom[12] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800};

int address = 0;
byte = 0;

void setup() {
  // put setup code here, run once:
  pinmode(latchpin, output);
  digitalwrite(latchpin, low);
  spi.begintransaction(spisettings(500000, lsbfirst, spi_mode0)); // initialize spi
  serial.begin(9600);
}

void loop() {
  // put main code here, run repeatedly:
  address = eprom[i];
  serial.print(i);
  serial.print(" ");
  serial.println(address, hex);
  serial.println(" ");
  addressout(address % 256, address / 256);
  delay(1000);
  i++;
  if(i > 11) = 0;
}

void addressout(byte addresslow, byte addresshigh)
{
  digitalwrite(latchpin, high);
  spi.transfer(addresslow);
  spi.transfer(addresshigh);
  //delay(1);
  digitalwrite(latchpin, low);
}



did try code 1 shift register, first? know leds connected correctly?

Arduino Forum > Using Arduino > Programming Questions > Arduino Uno and CD4094 [Solved]

arduino