How to reset MKR board ?
i received mkr1000 board, worked fine first time after sometime not getting connected device. device manager doesn't show com port mkr board. have tried double clicking reset also.
is there other method apart double click reset reset mkr port appear on arduino ide.
thanks
is there other method apart double click reset reset mkr port appear on arduino ide.
thanks
currently "double tap reset" best option.
i found used less after updated boards both firmware update , boards txt update.
to boards txtx update
1. select boards
2. select board manager
3. in "type" box select "updatable"
4. update listed.
to firmware (my method)
1. select sketch
2. select include libraries
3. manage libraries
4. select updateable in type box
5 update listed.
6. close library manager
7. select tools
8. select wifi101 firmware updater
9. select correct com port mkr !
10. test connection.
11. select correct firmware middle box.
12. hit update firmware box.
13. optional update certificates , or add domain
my mkr's have been more reliable since.
i found used less after updated boards both firmware update , boards txt update.
to boards txtx update
1. select boards
2. select board manager
3. in "type" box select "updatable"
4. update listed.
to firmware (my method)
1. select sketch
2. select include libraries
3. manage libraries
4. select updateable in type box
5 update listed.
6. close library manager
7. select tools
8. select wifi101 firmware updater
9. select correct com port mkr !
10. test connection.
11. select correct firmware middle box.
12. hit update firmware box.
13. optional update certificates , or add domain
my mkr's have been more reliable since.
Arduino Forum > Products > MKR Boards > MKR1000 (Moderator: AndreaRichetta) > How to reset MKR board ?
arduino
Comments
Post a Comment